Christopher Masto

Virtually every app collects crash reports and anonymized analytics. Better for them to tell you about it than not.

My partner is allergic to coconut. That also means no palm oil. You know what has palm oil in it these days, often randomly replacing the previous oil in something that used to be ok? Everything.

They’re more than great coats.

I’ll give you that they didn’t get the numbers perfectly correct with the 95-99% thing, but I don’t think the accurate numbers change the point they were making – if anything, it’s a stronger comparison. According to Wikipedia (https://en.wikipedia.org/wiki/Honey#Nutrition), honey is 82% sugar and 17% water. HFCS is 24% water (https://en.wikipedia.org/wiki/High-fructose_corn_syrup#Composition_and_varieties), which makes it 76% sugar.

When I say facts, what I’m referring to is that honey is basically straight high-fructose sugar, in the same way that high-fructose corn syrup is. Wikipedia: “The average ratio was 56% fructose to 44% glucose”. The HFCS that people freak out about in most food is 42% or 55% fructose. So these are very comparable sources of carbohydrates, which is one of the reasons it’s so easy to fake honey with corn syrup.

I’m not making a value judgement here, and I didn’t see one in the GP post that was heavily downvoted. Just pointing out that honey has a very similar composition as HFCS, do with it as you will.

As a bonus, my favorite use for honey is to make honey mustard dipping sauce for chicken tendies. Here’s my not-so-secret recipe: Gulden’s spicy brown mustard, honey, and mayonnaise. (adjust the ratio to your taste) And if you haven’t tried Mike’s Hot Honey, I say seek some out. You can use it in the honey mustard sauce, but I like to make myself a little yogurt, granola, and fruit parfait for breakfast and drizzle hot honey on it.

People are downvoting a simple, literal fact.

There are plenty of home gamer quats too (just look for active ingredient: yadda yadda ammonium chloride) My favorite is Formula 409. I buy the industrial refills and just top up the sprayers.

One thing if you’re actually trying to sanitize: they have a contact time. You need to let the surface stay wet for a minute, or 10 if you’re trying to kill the andromeda strain.

Leaded gasoline.

Not the question you asked, I know, but I have been buying my tea from uptontea.com since before they had a web site and you had to call in from a printed catalog. Loose leaf tea is economical and gives you a wide variety of choices. I’m drinking my go-to Kensington Breakfast Blend right now.

You have disabled Safe Browsing. That prevents files from being checked for malware, so all downloads are blocked by default (nothing to do with Firefox). As you noted, you can override the warning to download anyway, but it is an extra step to try to reduce the chance of someone accidentally running a malicious program.

Sorry, I forgot about this thread, but I was reminded today when I saw the new bug. The issue that originally affected me was https://github.com/home-assistant/core/issues/103208. It broke Xbee users, so not everyone. My Zigbee integrations didn’t work after the update so I had to roll back to a backup for my first time with HA. A patch was developed, but it didn’t get integrated into any of the 2023.11.x releases, which I found kind of frustrating but I figured I’d wait it out and eventually there would be a version that works again.

Fortunately I held off on 2023.12, because according to https://github.com/home-assistant/core/issues/105344 a bunch of people are having problems with this release too.

The last update broke zigbee for a month, so forgive me if I don’t jump on this bandwagon.

That’s how it’s made. They melt cheese with emulsifying salts, squirt it into a plastic envelope, and it cools into the shape of the wrapper.

This will not be a popular thing to say in Lemmy, but I don’t think self hosting those things is going to reduce your headaches. I have worked in IT all my life, and I have lots of experience running services of all kinds, including my self-hosted home stuff. Nowadays, I am very mindful of the cost in time and hassle to DIY rather than let someone else handle it. When it comes to calendars, everything I see has an option to integrate with Google or Outlook, so I can’t imagine how sharing and syncing are going to be better if you move to some obscure open source thing. I fought that exact battle for an entire decade - you don’t want to get me started talking about CalDAV - and my life got so much easier when I gave up and moved my stuff to a standard provider.

This post is basically what the Lemmy community has become, in a nutshell. I thought there would be a mass exodus from Reddit but it seems like the only people who came here and stayed are far out on the fringe. Between this kind of stuff and “I refuse to own a car because the infotainment system is not open source!”, I find myself more and more gravitating back to Reddit for some normality… which is a hell of a thing to say.

It’s a little confusing. Nextion makes “HMI displays”. It’s an integrated module that runs its own software, draws the UI, processes events, etc. It’s a black box that just reports back to the processor “button 3 on page 1 has been pressed”. You design the interface with that ugly Windows app and upload it to the display, but there is no direct access to the screen.

To make use of the Nextion display, you need something connected to it, and that’s where the ESP32 comes in. It receives those “button 3 pressed” events and handles them, but crucially, it does not have raw access to the screen, so you can’t just draw your own widgets on it like you’d be able to do on an ordinary display.

There are other projects to build your own controller with a touch screen and a microcontroller; the appeal of the NSPanel is that it’s basically an ESP32 and a Nextion display conveniently prebuilt, has decent hardware and aesthetics, and it isn’t hard to reflash it with ESPHome. Replacing the Sonoff firmware on the ESP32 doesn’t change the limitations of the Nextion display.

I haven’t seen that software, but it doesn’t look like it can be used with Nextion screens, which are totally proprietary.

The way I use them is to reflash the firmware with ESPHome, at which point they have nothing to do with Sonoff. I got really into these things when they came out and made a video about the process: https://youtu.be/Kdf6W_Ied4o?si=4nh7kP28IglwVHBx. There are a bunch of different ways to use them including retaining the original software, but I kind of stopped paying attention when I got mine working.

It’s worth noting that they have two different products. The “NSPanel Pro” is completely different, I think it runs Android. I haven’t played with that at all.

I have one Kindle Fire using the Fully Kiosk Browser and a wall mount with a hidden power cord (https://a.co/d/05GVxVP). It uses the camera to turn on when you walk up to it. It’s ok, but I installed it 3 years ago and never really finished making a dashboard for it. In practice, we control the vast majority of stuff by voice with the Google/Nest Home integration, or switches. The big control panel thing doesn’t hold enough interest to even bother putting controls on it, and I mainly leave it showing air quality graphs.

Of more practical use are smaller panels for area-specific uses. I mainly standardized on NSPanel, because I was experimenting with them and ended up with a bunch. Example: https://youtu.be/DBzg7v1Q5Zo. I have a short attention span and tend to stop when it’s 90% good enough. I also have in other places a DIY HA SwitchPlate, and HASPone on a Lanbon L8.

I suppose that’s true. Rereading my comment, it’s a bit over the top. If I pretend now I don’t know anything and start at http://home-assistant.io, it’s not that hard to scroll down, see the thing, and buy it. I don’t know exactly how I got so off-track when I tried. Probably I knew “a little too much”, as in the words “home assistant blue” in the back of my head, Googled for that and got distracted by “I need to understand why there are two boxes and one isn’t for sale anymore, so exactly what is the difference is between them?”.

Coming back to that naive journey, though, I could see how someone could end up buying Green with no wireless dongle or Yellow with no CM4 (especially since you can’t get one).

I still think that for the limited size of this ecosystem, choosing a box shouldn’t be confusing. I can now understand where it came from, though, once I realized that HA Yellow was designed around a Raspberry Pi board that became unobtainable, so they had to go with a different architecture.

I have a friend who bought a new house and wanted to do some automation with the lights. While my HA is a total DIY setup, I thought maybe I’d suggest he get one of these boxes I was vaguely aware they sell. I went to the web site and first of all couldn’t find them from home-assistant.io (I see they’re on the front page at least now, but I swear it was harder to find when I looked the other day). Then I got lost trying to understand what the actual box was… yellow, blue, some third party odroid thing? Didn’t matter, everything was out of stock anyway. Now there’s a green one. I’m not sure this is actually making it easier to get started. I’m somewhat of an expert and I gave up.