icedterminal

I was under the impression that Tahoe translates to “big water” which is funny.

But “Tar pit Tar pit”, “Way Way” and “Desert Desert” are indeed infuriating.

Depends on ISP.

If IPv4 ban, it is indeed 100% ineffective. Nearly all ISPs either CGNAT or rotate addresses. If IPv6, the ISP just forwards a 64 bit block and leaves it at that. You must call and request a new IP block. In which case you’ll be told yes or no. If yes, it’s either free or paid.

I know with ATT Fiber, they don’t offer address changes unless there is some security or service interruption reason. You have to unplug the modem for 30+ days so the lease expires if you don’t want to do rounds with support. My IPv4 address has changed once, but my IPv6 address block has never changed.

Lmao

Clean up your tabs please. Omg

You either set the DNS settings per device to the system running PiHole / AdGuard Home, or if your router allows, set the DNS there. It’s ideal to set it on the router.

Any time a device makes a DNS request to a domain, it’s checked against the list. If found, it’s stopped. If not found, it gets sent upstream to your choice of a public DNS configured during setup. I use Cloudflare (1.1.1.1, 1.0.0.1).

Skin is an elastic organ. If you start putting on fat, your skin stretches. The foreskin can be stretched with regular motion. Retracting it on a daily basis would encourage it to stretch. Infections occur only when the foreskin isn’t cleaned well. I don’t know your circumstances personally. Teaching you how to keep clean and retracting the skin is a viable method. I’m not discrediting your parents. Just sharing the logic behind why circumcision is not absolutely necessary or should be the first choice. If this was the informed decision they made for you, I’m glad it was successful with no complications. That’s the best possible outcome.

When a baby is born, the doctor may ask if you’d like to have your baby circumcised. If this is the case, it happens before they leave the hospital. This is where that time frame comes in. Otherwise, circumcision is “recommended” within the first two weeks after birth.

Here is a medical reason at birth: https://www.cdc.gov/ncbddd/birthdefects/hypospadias.html

Any medical condition after birth that requires a circumcision, needs to be performed by a doctor who knows exactly what they’re doing. Not every doctor does. So you end up with not-so-great stories shared around.

Edit: You describe the tight foreskin you experienced which is in the second link I provided. It is a medical condition that doesn’t require circumcision. In fact, you could still have your foreskin right now. The condition usually goes away over time. Believe it or not. Circumcision is an easy way out. But one that may cost. And in the case of that individual, it did.

Oh boy. You’re about to learn a lot.

A circumcision isn’t necessary when there’s nothing medically wrong with you. It’s literally mutilation when it’s done for religious or appearance reasons. Spoiler! These are the two most common reasons why this procedure takes place. You didn’t consent.

When you’re born, the foreskin is fused to the glans (penis head). A foreskin’s purpose is protecting the glans and keeping it moist. A circumcised penis is scientifically proven to have reduced sensitivity because the glans are exposed all the time.

This procedure usually happens when the baby is 24 to 48 hours old. There are over ~100 deaths a year from circumcision. If an infection occurs, this can easily get out of hand and cause the loss of all or parts of the penis… on a new born baby mind you. Complications later in life may include, but not limited to: pain or discomfort with an erection, erectile dysfunction, or abnormal shape or size of an erection.

Because a new born penis is incredibly small, the slightest mistake can lead to disaster. In some cases, can mentally fuck someone up. Unfortunately, I am personally affected by a botched procedure. Too much skin was taken off and the urethral opening was torn.

It’s an unnecessary procedure that can fuck up your otherwise healthy at birth child for the rest of their life. All for some religious reason or because parents “don’t like it” - every male is born with it. It’s there for a reason.

The evidence you want to see is literally something you can do or search the Internet yourself. There’s thousands of results. CPU is better than a GPU no matter codec you use. This hasn’t changed for decades. Here’s one of many direct from a software developer.

https://handbrake.fr/docs/en/latest/technical/performance.html

It’s not odd at all. It’s well known this is actually the truth. Ask any video editor in the professional field. You can search the Internet yourself. Better yet, do a test run with ffmpeg, the software that does encoding and decoding. It’s available to download by anyone as it’s open source.

Hardware accelerated processing is faster because it takes shortcuts. It’s handled by the dedicated hardware found in GPUs. By default, there are parameters out of your control that you cannot change allowing hardware accelerated video to be faster. These are defined at the firmware level of the GPU. This comes at the cost of quality and file size (larger) for faster processing and less power consumption. If quality is your concern, you never use a GPU. No matter which one you use (AMD AMF, Intel QSV or Nvidia NVENC/DEC/CUDA), you’re going to end up with a video that appears more blocky or grainy at the same bitrate. These are called “artifacts” and make videos look bad.

Software processing uses the CPU entirely. You have granular control over the entire process. There are preset parameters programmed if you don’t define them, but every single one of them can be overridden. Because it’s inherently limited by the power of your CPU, it’s slower and consumes more power.

I can go a lot more in depth but I’m choosing to stop here because this can comment can get absurdly long.

Whenever you connect your phone to any car with a handsfree system via any means (BT, USB, App) you have the option to allow it to access and store your contacts, phone call log, and text messages. If you install the companion app should your car have remote features, this app can collect even more data this way. If you say “call grandma” to handsfree or select her via the infotainment system, the car knows this and the manufacturer does too. The manufacturer can then save her number according to their policy and locate her. As a company they can perform a data sale/trade with their third parties and find out her real name if you don’t have it saved (Yes this is how companies have profiles on you even if you never used them.) Depending on the manufacturer, yes your car does actively send recordings back to the manufacturer from the microphone built in the cabin.

https://foundation.mozilla.org/en/privacynotincluded/articles/its-official-cars-are-the-worst-product-category-we-have-ever-reviewed-for-privacy/

It does. If you purchase a device from the carrier, it’s guaranteed to be preloaded with their apps. Verizon currently states

“we may change your wireless device’s software, applications or programming remotely, without notice.”

https://www.verizon.com/legal/notices/customer-agreement/

The solution is to get a phone from the manufacturer themselves. They don’t come with carrier bloat.

Linux uses half the RAM Windows does in a fresh install. 8GB can absolutely be done on a Linux system without worry. To aid systems with 4-8GB RAM, Windows compresses. This has allowed OEMs to ship systems with 8GB as a minimum. This just isn’t enough for multitasking. The CPU is tasked with constantly compressing and decomposing if you’re attempting to multitask. This can make an already cheap laptop feel a little more sluggish. 16GB has always been the minimum for gaming systems and these days it’s becoming apparent 32GB is needed. 8GB is just pitiful for a computer these days.

Addressing the OP, mobile devices used to only need 2-4GB for the longest time. The OS wasn’t that heavy because the ARM CPU could only do so much. As the CPUs improved, higher resolutions were used, prettier animations and more features got added. This all needs more RAM. Android developer options will tell you how much RAM you’re using. A feature of Android is to keep a process cached in RAM that’s been recently used. This is present to aid in battery life. Even if you swipe the app away from recents list, a portion is cached so the next time you start it, the CPU doesn’t have to work as hard to load it up. You can see this under Running services > Cached processes. This means it’s more beneficial for the mobile device to have more RAM.

The default power plan Asus setup is doing this. You change power plan settings.

Yellow signs are suggestions or warnings. Always have been. Construction (temporary) are orange. As seen in the OP.

When it comes to what order on how you should follow them:

• Orange
• White
• Yellow

If it found a way, then your server configuration is inadequate. Are you using old ciphers or protocols? Missing headers? Wrong headers? Something doesn’t add up here.

You always will. Welcome to the Internet. The difference is whether or not you’ve taken steps to secure your stuff. You need to understand what this malware is looking for. It’s explicitly looking for unsecured services. Such as WordPress, SQL, etc. There are inexperienced users out there that inadvertently expose themselves. I see this type of probing at work and at home. Don’t overly stress it. My home server has been running for a decade without issues. Just keep it updated and read before you make any changes if you don’t fully understand the implications.

My home based server is behind a pfsense firewall. Runs Arch. Everything is in a non-root docker container. SELinux is enforced. All domains are routed through Cloudflare. Some use Cloudflare Zero Trust.

Oh my. You’re doing it wrong. Exposing the unencrypted connection without the proper security measures is putting yourself at risk. Regardless of how strong you set the password, the connection can still be abused in all manner of ways. If you read the jellyfin documentation, you’d see the developers clearly state you should never do this. You need to put Jellyfin behind server software. Specifically a reverse proxy. I use NGINX. You can setup your connection to be secure this way. You can now also use Cloudflare if you have cache turned off. And if you really wanna go the extra mile, route it behind a VPN. Though this makes it harder for those you share it with or some devices that don’t support VPN.

Please revise your connection. If you need help, feel free to reach out.

See 2.5.6 here: https://developer.apple.com/app-store/review/guidelines/

It is possible to build perfectly decent web apps but many times they choose not to or it’s too much trouble

On iOS, they quite literally can’t in some aspects. They’re restricted to using the supplied WebKit Apple enforces. On Android you can use the Blink Web View (Chromium) or Gecko Web View (Firefox). Both of which can be bundled in the app, or you can use the system version.

They have different browsers with limitations but I don’t know about not proper.

Every single iOS “browser” is WebKit. AKA Safari. Due to Apple’s plug-in system being proprietary, it’s difficult to extend. Third party browsers typically use JavaScript injections which slow down the browsing experience. The supplied WebKit is also watered down and updated on a slower cycle. Apple intentionally makes their browser better.

You’re not actually using Microsoft Edge. You’re using Safari and it’s being identified as such by the UA string. Due to Safari being in last place for web standards feature support, it’s not surprising you’re coming across the issue.

Doubtful. Load it up in a VM. Windows guest, Linux host. Use a network monitor to see what it does with and without a firewall on.