Agreed. The products I have used above, DrivePool, SnapRaid and UnRaid are all software solutions. This was important to me because I was reusing hardware and had a real eclectic mix of drives from 14TB NAS drives to 256GB laptop drives that I wanted to get more life out of.

The only hardware limitation is the parity based apps SnapRaid and UnRaid need your largest drive to be the parity one. Makes sense but in a situation like mine where I had a 14TB drive and the next closes was 8TB, that parity drive wasn’t well utilised. Not a big issue but.

As others have said, you certainly can.

If your current system is a Windows PC then a super easy way to go about it is to purchase a product called Stablebit DrivePool which will allow you to combine multiple hard disks into one drive, and then do duplication of data you find important. Share that virtual drive as a Share that your other systems can see. DriePool is a super reliable product. Only downside other than the one time cost is that its redundancy is based on file duplication, which has the benefit that you can pull your drives out and use them elsewhere as any one file is always contained on a single drive, but unlike parity based solutions it’s super space inefficient to retain duplicate copies. It’s a tradeoff between simplicity and time to recover in a failure versus maximising disk use and reducing costs. Depending what your NAS is for, maybe you don’t need that redundancy but. You can also team it up with another product called SnapRaid (which is free) which can make your redundancy parity based.

I ran DrivePool for years on Windows and it’s a great product. Windows itself isn’t overly optimised for this use case, but as a predominately Mac household having access to Windows on a headless system was handy if I had to run the odd Windows only apps, so using Windows had its perks.

While Windows and a PC will cost more to operate, you’ll potentially be out well ahead if you don’t have to buy additional hardware. It’s likely worth running what you have into the ground rather than buying new hardware. There’s guides on some things you can do to optimise Windows too.

I’ve since moved to using UnRaid which is a paid product (one time purchase) designed specifically for NAS on your own PC. Great solution but I’d say that the barrier of entry is much higher than a Windows box. Still very versatile product. Moved to that as over time I’ve used a bit more Linux in my life, and I also had reduced need for Windows as the NAS OS.

Haven’t tried TrueNas but that’d be an alternative to UnRaid.

I am curious, how many fans were still there at 1:30? At one point the tv presenting showed people being asked to leave and there wasn’t a stack of people left several hours after p1 was cancelled. Made me wonder whether if they were incapable of keeping all stadiums staffed, could they have funnelled the remaining people, if not too many, to the main grandstand (or say two) and closed all the others.

I do feel for the people but, especially those that may have only had tickets to day 1. Even those with 3 days missed out, wasted a day off work, etc, as a result.

It happens though…Spa 2021 being another similar situation where the crowd wasn’t necessarily ejected, but they didn’t see what they’d come for either.

I quite like the sprint, so my rather boring opinion is to move the qualifying to Saturday afternoon, then slide the sprint race and it’s qualifying forward a slot. I would then have Parc Ferme kick in at qualifying at the some time as a normal weekend.

This would mean teams can and will play around with setup over the sprint quali and race, but I’m ok with that given the smaller point allocation. Also neither the qualifying or the sprint itself are necessarily ideal places to be playing around with setup too much, especially since no one pits in the sprint, so doing too much setup change might be a risk for a team. It does mean those that got it terribly wrong after FP1 can gamble on some setup changes however. Ultimately coming out of the sprint you’d still need a car fit to go through the GPs qualifying and race, so there’s still that to balance things a bit.

The reverse grid suggestion is interesting, but I’m not sure how it’ll work in practice and perhaps it needs to be a longer race then to allow more time to come through the field. If teams feel the sprint is too high risk already, I can’t see the top teams wanting to now come through a field every sprint session. If they’re going to do this they need to pick tracks with high overtaking rates.

The 3rd and 4th was due to good team strategy to get a lap down early in Q3. They did well enough still on their own merit to make it to Q3, but I suspect they’d have been much lower if the cars weren’t compromised by the weather.

Bigger question for me was why Perez came out so late for Q3 when RB clearly wanted Max out as early as possible.

Getting pole should be a guaranteed victory…unless you’re Charles Leclerc

It was remarkably short sighted when he is in a tightening contest for 2nd place in the championship, and a DNF literally halved the gap to third position. He was never going to leave that corner in first place anyway, with Max ahead and on the inside line. A podium would have been a great result given his run of form.

If times a concern, they could possibly cut down the time by only checking the areas on the teammates where the first cars were found to be infringing, so in last weeks case the board wear.

Sure, a single team could intentionally break the rules using different methods, but intentionally doing so runs a high risk one of the two cars is selected for review and disqualifications not a light penalty, even if it only gets caught on the one car. For a situation like last week where there’s no real indication there was malicious intent, checking just the board of the second car would cover the scenario where the same setup mistakes is being applied to both cars.

Is the time a limiting factor here? I read the results of 4 cars checks came 2 hours after the GP finished. Given we have night races that are followed up with FP1 less that 5 days later (following Friday morning), there possibly a logistics issue if doing those checks across 20 cars can’t be completed the evening of the race for any reason. Possibly isn’t just a headcount issue too if particular equipments needed? There’s time needed to ship the cars to other countries.

Watching Ted’s notebook teams are often well into teardown not long after the race ends, so perhaps losing a night becomes an issue for the back to back races.

I’m not sure to be honest, but just a thought.

It’s definitely worth thinking about your use case and whether a second hand mini-pc of some sort is a better option. Along with the Pi itself many people are probably going to need a new case and quite possibly a power adapter too given the new power profile. An older PC where that’s taken care off, and where you probably have a 120GB SSD included, could be the better option for some people.

I’m struggling to find where I heard about this, but if you post to Twitter (or I guess it’s X now) and tag @Sync, they should get back in touch with you and offer you a bonus 10GB for the positive outreach.

Since I don’t know about where I heard about the offer originally, the next best thing might be my post which Sync responded to as evidence of the bonus. Along with one or two other bonuses which one may have been a referral, I’m at 17GB on the free account which is pretty decent, and certainly not as burdensome as the referral process one has to go through with Dropbox to grow the free tier there.

They’re a great service from the time I’ve spent with it and worth a go.

I think the key question is to ask what about Googles solution is driving them to look elsewhere. Once that’s known it’s possible to work out if NextCloud deployed in house or via a partner is the right way forward, or if another cloud offering might be more suitable.

If those were my requirements then I’d be looking at Synology.

Currently using a Windows PC with Stablebit Drive Pool to pool about 10HDDs into one consolidated pool. Nice way to get a stack of storage and to repurpose an old PC I already had, but for a low effort option Synology would be my pick based on all the reports I’ve heard about it being a top notch option. My PC is fine but when things break you need to be able to troubleshoot a Windows setup, which is fine but maybe not for “mum and dad”.

Just pick a NAS from them that does what you need. Whenever I look at them it seems to be about determine how many drives you need and whether you want a high performance one (to run Plex servers and the like) or a low spec one that just does storage and some less intensive stuff.

A number of people have touched on the perimeter security, but you can also look at your internal network too and whether you have the systems being exposed on vlans with firewalls preventing connectivity from those systems back to your other stuff that doesn’t need to be exposed. Could help cover you if a system is compromised due to bad config, zero day exploit, or whatever, by limiting the ability to then go sideways through your network to exploit other systems. Depending on what you are hosting there may be zero requirement for your externally facing server to need to talk to the majority of devices on your network, or the talk could be one way only (internal facing to external facing).

The Mastodon developers and operators of mastodon.social seem pretty supportive based on what information they have so far, based on their blog post.

https://blog.joinmastodon.org/2023/07/what-to-know-about-threads/

The tone from that so far is that federation would be in the cards for them, assuming Meta implements ActivityPub properly.

Cheers. Seems to be incrementing ok with my posts today, but total seems like it was reset or is incrementing only from the past 24-48 hours of comments, so is short 50 or so.

Servers still performing well since my last post but 5 hours earlier.

My position differs currently for Mastodon and Lemmy.

In the case of Lemmy, I’m not yet 100% sure. Lemmy’s strength may also prove to be a weakness I feel in terms of it replacing Reddit, in that the decentralised nature naturally creates a dispersion of the audience. While anyone on Reddit could create a community, having them in one place really funnelled people into logically named communities. On the other hand while subscribing to a number of communities for Lemmy, it’s not that infrequent to come across the same or similar community on multiple instances and then needing to work out where you want to go. On one hand it’s probably good to have the varying perspectives and culture this will bring, but I think it’ll also make it hard for users looking for that definitive place to go. It’s very much early days though and perhaps many of those communities will naturally assemble in mass on various instances once the dust settles.

We’ll see how that plays out I guess, and right now my Reddit use is at maybe 10-20% what it was and I’m really looking to invest my time here. I think with time that both Lemmy updates an 3rd party clients will make working across instances more transparent and in turn broaden appeal.

I’m more bullish for Mastodon in the short term. The reason for that is my usage concerns me looking to follow an individual rather than locate a community of individuals. Since people will have one account, there’s less impact caused by decentralisation as my interactions with a person I follow is very much 1:1 (unless for some reason they chose to create and maintain multiple accounts). If I want to follow Apple’s account, they’ll presumably have a single one versus there maybe being 6 viable Apple communities across Lemmy instances. I find my use of Mastodon in terms of user experience is much closer and familiar to Twitter than currently Lemmy is to Reddit. Additionally, once it’s enabled for ActivityPub, I think Meta having Threads throws significant support around that particular ecosystem, and brings it to the masses. Can’t imagine we’ll see a billion dollar company spin up a Reddit alternative that is Activity Pub integrated to give Lemmy that same boost, unfortunately.

To be clear I’m very supportive of both Lemmy and Mastodon and want both to succeed. I do think reddit being centralised has some benefits but, especially for people not looking to invest heavily in browsing across instances, and that it’s to be seen how Lemmy will evolve as it grows and if casual users will be able to sign up and easily find the communities and information they are after. The 1:1 person interaction for Mastodon I think simplifies things and Thread potentially will result in a massive boost for Mastodon. It’s early days for Lemmy and I can’t imagine in Jan or Feb that the majority of us here had even heard of it, let alone considered leaving Reddit. It’ll only continue to grow and I’m excited to watch it do so.

Minor thing but over night both wefwef and Memmy clients are showing the wrong comment score (karma) against my profile, and given they are showing the same amount I assume it’s related to API fed data. Value was correct yesterday. Easy for me to confirm given I have only 2 dozen posts and the value has dropped to single digits.

Not a biggie, but figured I’d report it in case there was some issue causing that. Might be some optimisation around indexing or something has intentionally or unintentionally impacted that.

Otherwise the service feels much more stable currently. No timeouts today where it’s been very frequent the past few days. Nice job. 👍

I have a few PIs already and like them, but if I was doing a system today I’d probably go with the HP Elite Desk (800 Gen 2 or 3 perhaps), sourced as an ex-gov unit which can be had very cheap. The PIs have gotten expensive enough that they’re basically price equivalent once you add a case and possibly an SSD to it, at least locally. Have used those HP systems at work and they’re decent little boxes.

The caveat is that I’m not too fussed if I’m drawing extra power, as long as the performance justifies it. If power was a primary concern then the PI may still win out. I’m also not going to need to consider size in anything I do, and then then the micro PC form factors aren’t massive.

For me it’s a HomeAssistant instance. Great product that has some very tangible use cases that can benefit ones household in terms of being able to implement nice automations etc, and also a great hub in that it supports such a broad range of products and services. As an Apple user in particular its one of the great ways to get non HomeKit certified devices working with Siri/Homekit on my other Apple products.

It also makes installing addons a breeze including other products people have mentioned here such as AdGuard Home (as a PiHole alternative) and the like.

A few years ago I’d say it wasn’t for the average Joe, but I think the product has really matured and is much simpler than it used to be. There’s a strong community out there too.

For multimedia I’d say Plex personally, but Jellyfin would be another option. Good way to manage personal media libraries.